One person who has had many samples of time. Typically that person is looking for outliersto reduce or disappear
A family with samples from different members. Typically one person is challenged and since the family group has shared DNA and diet — the hope is that the bacteria grouping causing the challenge will be identified. Once identified, it may be actionable.
This scenario will have more tools added over the next weeks.
If you have two or more samples uploaded, you will see the top two items on the Available Samples page. These may be collapsed into one over the next few weeks.
Clicking the right button of these two will take you to a sample selection page.
Clicks TWO or more samples
The program will list all items below that matches all samples OR all samples except 1 (but at least two).
I selected a group of 5 samples from when I was having a ME/CFS flare.
The lack of dehydrogenases above would account for high lactate(brain fog) and agrees with research [Nicotinamide adenine dinucleotide (NADH) in patients with chronic fatigue syndrome]
IMHO, it correctly identified what was wrong with me.
KEGG Modules takes a bit of research to understand.
Doing some research, I found “. L-tryptophan is produced in the shikimate pathway from chorismate” Which lead to many ME/CFS articles on PubMed.
Again, it may take some research to understand what this is.
This informed me which bacteria were constantly high over 5 samples
This set of tools does not give immediate answers; it gives you leads to investigate. For myself, the findings plus the use of PubMed studies weaved a story of what happened that agrees with the literature. This is very important because ME/CFS contains dozens of subsets. Often I have seen that what is helpful for one subset is harmful for another. I suspect this also applies to other conditions, such as ASD/Autism.
In this case, it identified one key family to reduce. Identified enzymes that I was short on. Lead to a possible supplements that I should consider because of the dysruption.
A reader asked which one to use. They can be compatible prices, especially this weekend with Black Friday specials A cost item that should also be factored in is shipping costs to and from. In the US, Thryve comes with a postage paid return package.
The Numbers
The upload page gives raw numbers. I am also going to dive a little deeper into the numbers
Elusive 1%
Adjusting for number of samples, they appear very similar.
Elusive 2%
These charts are those between 1% and 2% in occurance
Elusive 2-4%
This is the count between 2 and 4% Frequency. BiomeSight appears to have an edge.
Elusive 4-8%
As above, BiomeSight curves appears better. 100 is at the 84%ile with Thryve and at the 41% with Microbiome; in other words, Biomesight report more in this range per sample. This is important for the AI analysis, because we need a threshold count before we can detect patterns.
Elusive 8-16%
Thryves now pulls ahead. Biome Sight has 70 bacteria count at the median, while Thryve has 90
But wait! Does it report on what you are interested in?
In my last person analysis, there was two probiotic recommendations:
I would like to see those counts on my next sample…. so clicking on the above links, I see that stats:
Ouch, BiomeSight is the only one that reports either! Looking at the parent group, I see BiomeSight again reports better
Bottom Line
There is no clear better or worst — it depends on your needs.
BiomeSight offers free processing of Thryve FASTQ files which is big Kudo to Rose at BiomeSight. Thryve offered free processing once upon a time, but it does not appear to be offered any more (or it is sufficiently hidden that I cannot find it).
The new kid on the block, nirvanabiome, which uses CosmosID.com, is 3x as expensive and does not appear to report any more bacteria types (which is surprising given their claims, I expected counts close to Xenogenes shown at the top of this post). I do not have sufficient samples via CosmosID/Nirvanabiome to do more analysis.
nirvanabiome also appears to be targeting the Autism market. I have a separate blog on Autism and the Microbiome, so I am interested if they will produce actual beneficial results or if this is “the best of intentions, the worst of execution” scenario.
I have implemented an upload for Microba, an Australian firms that claims “With the most comprehensive microbiome test available”. Instructions on how to do a download and upload is in this
I have tried several times in the past to do it. One of the biggest problems is that they do not use NCBI reference numbers or names. In fact, many of the bacteria they name — you will not find a single study on PubMed with that name. In other words — valueless information.
I have a mapping of their interesting names to NCBI names on line (and it will grow as samples are added and new names are added). The mapping is located here. I have repeatedly email them to make a download with NCBI taxon numbers available without success.
Left side is their name, right side is NCBI name. CAG-### is very vague.Some additional “delights”
Only Selected Layers are Reported
They report only on the Phylum, Family, Genus and Species levels. Excluded are Orders, Classes and Strains. After the mapping, we are typically left with less than 100 bacteria taxonomy versus many more from other providers. I do not know how they define “With the most comprehensive microbiome test available”. Most means better than ALL…
This is made worse by the use of atypical names for bacteria. If you are high “Peh17” and go to PubMed to see what will lower it, or what conditions are associated with it — you hit a blank page. They may provide advice — but the basis of that advice cannot be independently checked.
The sum of all Species/Genus/Family is 100%. This implies that they have identified every bacteria — impossible. They have scaled the numbers of the bacteria that they detected to 100%. A person with actually 40% of one bacteria in their gut could see a report of 45%, 65%, 85% — depending on what other bacteria is there.
The report is to 0.01% that is 100 / 1,000,000, a coarser measurement than some other tests.
Bottom Line
For those of you who have already tested with Microba, you can upload and MicrobiomePrescription will do as much as it can with that information. If you decided to do a retest— I would not recommend using Microba for the reasons sited above. I have heard that the UK firm BiomeSight is making it easier for Australians to use their service. I have heard that duties and shipping costs makes Thryve Inside more expensive than BiomeSight.
Expect it to be a few days before 100% of your sample is ready — any new odd-ball names has to be researched and entered into the mapping table. At upload, you will likely be 80+% processed immediately.
A reader sent me the message below and gave permission to use his sample. I had, about a year ago, wrote The taxonomy nightmare before Christmas… that looks at the differences between lab results using the sample sample (as represented by a FASTQ digital file). We now try one more variation.
Last september I did (again) test my microbiome with Thryve. Because I had some general doubts about the validity of stool samples, I ordered two tests and took two different samples of the same stool and send them in under two different names. …the results confirmed my doubts as I got different bacteria levels of the ten strains Thryve shows in their overview.
STRAINS
% sample 1
% sample 2
akkermansia
0,2
0,4
alistipes
0,02
7,2
bacteroides
0,02
3,4
bifido
2,6
1
blautia
10,3
3,3
eubacterium
7,2
4,1
faecalibact.
1,7
11,6
lactobac.
1,1
2,2
roseburia
1,9
2
ruminococcus
26,6
13,8
So I do not doubt the reliability of each sample, but see that the validity of the sample is the problem. The results of a sample seem to be more or less random and not representative of the microbiome in general. …so I think that any advice given, based on the results of one sample is arbitrary. If we are to take the importance of the microbiome seriously, we will have to consider a new way of getting a representative sample to have a solid base for interventions concerning our health.
Sampling Statistics
The typical sample seems to contain a round a 100,000 bacteria and is usually reported out of a million (scaled up). “Bacteria in faeces have been extensively studied. It’s estimated there are nearly 100 billion bacteria per gram of wet stool. ” [src] The sample that you sent it was likely no more than one milligram.
To use the “if I was a Martian” model… It is like a spaceship abducting a boatload of people in the Mediterranean…. If the boat is a cruise ship full of fat diabetic elderly Americans you will get one result. If the boat are full of starving Nigerians children trying to become refugees in Europe, a very different result. That is a disturbing concept when you mind is fixed on a deterministic precise definitive result. It’s a sample folks! For most industrial processes, dozens (or hundreds) of samples are required to get quality assurance. For the nerds, some readings: [2015] [Wikipedia]
Example: Two employees working for the same company at the same job earning the same amount and living in the same community. You stop each of them and take a sample of how much money they have in their wallet. Would you expect them to have the same amount? Would they have the same number of pennies? dimes? quarters? Credit Cards?
I would expect differences in samples to increase as you move down the rank. It is similar to asking at one level [European, African, Asian] on the abducted ship above. At the next level [Swede, Dane, Italian, etc] , the counts between sample will diverge as you do more detail classification.
This is an illustration on why I do fuzzy logic on predicting symptoms with good success according to readers. Using studies from PubMed have been reported to produce poor results according to readers.
When the two samples are used to predict symptoms, we have a strong convergence. While the actors may be different, their impact are similar.
Adjusting for Natural Variation
Using counts without context is a good way to get upset without justification. I use percentiles to provide context and have a comparison page (which I need to revise). At the phylum level we see general agreement between the samples. One rare phylum was lacking in one sample (not found in 30% of Thryve Samples but only 6% of BiomeSight – hint: download the FASTQ files and process them thru BiomeSight [for free!]).
Medical Condition Matches
Going over to Pub Med Medical condition matches, we see a striking similarity between the samples as shown below. So for detecting medical conditions — they are almost identical to each other (despite the differences in bacteria)
End Products Predictions
Again, we have strong agreement between the samples using 3 buckets.
Both below 12%ile (i.e. Low)
Both below 82%ile (i.e. High)
Both in normal range
This means for this type of diagnostic evaluation — they appear to be the same.
Bottom Line
There are several questions that need to be asked (and an answer to one):
To the folks at Thryve (and Biomesight.com), why are the numbers so different?
For users of my analysis site: https://microbiomeprescription.com/, for diagnostic purposes there are few differences! We have general agreement for:
End Product Production
Medical Studies Matches
Symptom Matches
Detecting high or low levels by percentile
The critical difference between the information lab providers and my site is interpretation sophistication.
So, to answer the reader’s question “The numbers are in major disagreement, but the diagnostic significance of the whole sample is in strong agreement”. Doing the lab analysis is worth it — just ignore the lab’s “value added” suggestions/information.
FMTs have been tried for Chronic Fatigue Syndrome/ME with mixed success. The why of failures has been an ongoing interest of mine. We may now have a significant factor that has been ignored in these attempts.
Fecal microbiota transplantation (FMT) as a special organ transplant therapy, which can rebuild the intestinal flora, has raised the clinical concerns. It has been used in the refractory Clostridium difficile, inflammatory bowel disease, irritable bowel syndrome, chronic fatigue syndrome, and some non-intestinal diseases related to the metabolic disorders. But this method of treatment has not become a normal treatment, and many clinicians and patients can not accept it.
In addition to this, there was a podcast reporting success with FMT was associated with higher Phage Diversity in the donor. Phages are the police of the microbiome.
In this retrospective analysis, FMTs with increased bacteriophage α-diversity were more likely to successfully treat rCDI. In addition, the relative number of bacteriophage reads was lower in donations leading to a successful FMT. These results suggest that bacteriophage abundance may have some role in determining the relative success of FMT.
This implies that for a greater chance of success and less risk, than DYI fecal transfer, that a lab that tests for possible infections AND for phage state may yield the best results.
David Morrison requested this feature. The FastQ file is produced by the physical lab machine. This file is then pushed thru software to produce a list of taxonomies. Different 16s retail providers use different software and as a result – different reports. For back ground see this “Taxonomy Nightmare before Christmas” post.
Most of the Post-Covid19 Syndrome symptoms has a strong match to the symptoms seen with Myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS). This condition has no conventional medical treatment known. Treatments attempt to mitigate symptoms.
There is evidence that some people develop a long-term fatigue syndrome from coronavirus infections, Dr. Anthony Fauci said Thursday.
“There may well be a post-viral syndrome associated with Covid-19,” Fauci told a news conference organized by the International AIDS Society. The group is holding a Covid-19 conference as an add-on to its every-other-year AIDS meeting.
Fauci said the symptoms resemble those seen in patients with myalgic encephalomyelitis, or ME, once known as chronic fatigue syndrome.
“If you look anecdotally, there is no question that there are a considerable number of individuals who have a post-viral syndrome that in many respects incapacitates them for weeks and weeks following so-called recovery,” Fauci said.CNN
I am very familiar with ME/CFS as anyone who knows my story can attest. And I believe that while the model of why these symptoms are there is simple, the treatment is complex, not cookbook and must be individualized for each person.
COVID19 sends out chemical signals to the body to produce chemicals (metabolites) that its need OR which create a friendlier environment for it. The signals alters the microbiome (gut bacteria) to be a factory for its needs (Viralforming the gut). Once COVID is eliminated, the alterations should return to the prior state overtime— unfortunately a percentage that take a long time or never return. The best documented example is the Bergen’s Giardia Infection.
The microbiome consists of many co-operations between bacteria. Often there are over 2000 bacteria involved in various dialogs. Identifying the bacteria that are at abnormal (too high or low) is the start. The next step is modifying the bacteria by drugs, diet, supplements. At this point, we need to point out that there may be 100 or more abnormal bacteria that needs to be adjusted. Naive adjustments may make more bacteria abnormal.
My Proposed Process
This is the process that I have done with ME/CFS and it is likely that it may also work for many people with post-covid syndrome:
Look at the suggestions for correcting and make appropriate changes
Two+ weeks after making changes, repeat the 16s analysis and make the next set of changes.
This is an iterative process. Often the suggestions will cause one symptom to lessen or disappear while leaving others untouched. This is to be expected.
For more information, see
A series of videos on manipulating the microbiome using 16s results for guidance
Rose Walbrugh and I are proud to announce one click sending of data from BiomeSight.com based in the UK to MicrobiomePrescription.com. After you get your BiomeSight data processed, you can send the data across without needing to download and upload. You will be sent an email with an automatic login link (no more making up and remembering passwords!).
How to Do It and get Expert System Suggestion
Log in to Biomesight then on left Menu:
Click Third Part App
Click Microbiome Prescription
Find the sample that you wish to send:
If you need to RESEND sample, see the bottom — there is an alternative way. A rotating circle will appear
When Complete, you will see this shown
Check your email. You should get one like below (it is sent to the email used by biomesight)
Click Link. You should see a page like below
Updated to 2025 Changes
This will land you on the SIMPLE UI ANALYSIS page. This is an extract of the older tools that are still accessible if you click [Old UI]
The recommended approach is to click on [Beginner-Symptoms] which will update the page like shown below.
On the left is a scrolling list of predicted symptoms based on your sample using some 4000 other samples uploaded. Check the items that apply to you.
Why Checking Helps?
Depending on your test, you may have between 300 and 3000 bacteria. We want to identify the bacteria that are statistically associated to your symptoms. That is the bacteria causing the symptoms and not bacteria that may be out of range and likely just “noise”. The default [Novice] uses all bacteria out of range and typically give less targeted suggestion. You want to correct the bacteria that matters.
Check the types of suggestions you want made. If you are taking any prescription drugs, you likely want to include those. Some drugs will cause shifts in bacteria and the computation will indicate if they help or hurt you.
Then click Get Suggestions. After a few minutes of calculation (over 8 million pieces of information is evaluated), a page like this will appear with with short lists of key items to take or avoid.
Click on my Profile and then click “Just give me suggestion”
You will get a list of symptoms that are being used and the bacteria identified as being significant. Suggestions will only use these.
Using Novice will list all out of range, 46 target bacteria instead of 3.
Compact Suggestions
The number of items shown depends on the number that you requested. Weight is NOT how well things work (we do not have data to compare items), but the confidence it will cause a desired change (based on the number of studies showing the desired changes).
Digging Deeper
No one really knows how to correct dysbiosis. There is too much data (huge volumes) and sparse data (many things we have no data on). The safest approach is to do what every report says to take and avoid as much as possible on items to avoid.
At the top of this report are three links:
Further down the page is an option to ask some of the free AI sites what they would suggest. They is also a link to just get probiotics.
Consensus Suggestions
The above computations uses several different models of the microbiome. You can see what they agree about or disagree about on this page.
If you click the “books” on the right, you will see the precise logic used with links to clinical studies.
Food Menu Planner
This takes you to a sister site. All of the nutrients are transferred there and it uses a massive database of nutrients in different foods from around the world.
Clicking on Nutrients will show you the nutrients identified. Studies often use extracts and not foods. Most people have no idea of what foods contains what. Look at the list below!
Clicking on Takeswill translate these into foods — balancing the to take and to avoid nutrients
Clicking on Avoidswill translate these into foods — balancing the to take and to avoid nutrients. You will not find any studies on the microbiome impact of KIT-KAT….
Using AI Models
Just clicking the link sends the question to the AI (the question is also shown, so you can copy and paste the text into other AIs). Examples below.
R2 Probiotics
This is a new novel approach. Just click will send the data to another sister site that will attempt to compute the best probiotics — not based on studies, but based on what was seen with a healthy population of 1000 individuals.
This resource is atypical because it will identify probiotics that may be counter indicated on other suggestions. Remember the key concept: Take what everyone agrees upon! It is the safest option in the face of uncertain limited data.
DISCOUNT CODE
As part of this celebration, a discount code “MICRO” is offered on BiomeSight services. This results in £60 off, which brings the price down to £89 per kit ($110). Local USA fulfillment is now setup. Expedited 2 day delivery at £4.95.
Resend Sample
From Biomesight Support:
To be clear, there’s 2 ways to send it – on the row itself, the button will not be available it was sent already. But you can also do it by selecting the rows and using an alternative button that will send it again regardless. The screenshot below shows both.
New Feature
After transferring the data you will get two emails. One to log into the site. The second is a PDF analysis with suggestions and literature supporting the suggestions.
Bottom Line
Microbiome Prescription is dedicated to working with labs to enrich user experience and knowledge. BiomeSight has stepped up to the plate for cooperation and win-win attitude.
I am currently working with BiomeSight.com to add Taxon numbers to their downloadable reports.
At first sight, this should be easy, the sample of their complete taxonomy looks like this:
The problem is that their software have forced items into an unnatural structure to make presentation easy. An item that is under Class — when you go to NCBI Taxonomy Browser may be listed as:
Sub-Class
Super-Class
Order
Sub Order
Family
The result is that many many items have to be resolve by manual inspection of NCBI to find the apparent match and individually assigned. Example below, notice the “Group II” item which required working from existing matches for a line to identify probable candidates.
Update [MicrobiomeSight] Set OID=2731342 Where [Order]='Group II'
Update [MicrobiomeSight] Set OID=1643688 Where [Order]='Leptospirae'
Other issues concern differences of spelling and renaming, i.e. Cerasicoccales vs Cerasicoccus that was found….
While NCBI shows
We have a possible old/atypical name being used which obtuficates reports. This is one of the key reasons that I am pushing for taxon numbers in all uploads because without them, we would have massive inconsistencies.
After getting all of the Genus and Above resolved, I hit an issue with the species.. namely the list shown below remain unresolved. A few I did a google for and found no hits. Many had incomplete names.
Example:
Bacillus polyfermenticus in NCBI is Bacillus velezensis variant polyfermenticus
Acholeplasma ales
Burkholderia eae
Candidatus Methylacidiphilum infernorum
Cryocola poae
Dechloromonas fungiphilus
Desulfovibrio aceae
Enterobacter aceae
Enterobacter rottae
Erwinia dispersa
Haererehalobacter salaria
Haloterrigena gari
Herpetosiphon agaradhaerens
Megasphaera geminatus
Mycobacterium indicus
Oscillospira eae
Tessaracoccus terricola
Pasteurella eae
Stenotrophomonas retroflexus
Stenotrophomonas griseosporeus
Trabulsiella farmeri
Vibrio bacterium
Bottom Line
All Phylum, Orders, Classes, Families and Genus had matching taxon assigned. At the Species level, 6445 were identified and 21 were not. This means 99.7% of species were given taxon numbers. I expect BiomeSight.com to offer uploadable formats soon, ideally with automatic transfer from their web site.
Recent Comments